Pneumatic Automation & Motion Control Systems, Products & Solutions   1-888-506-1111   Français
Cowper Inc Solutions About us Contact
  Direct Solutions for:   Aluminium .Automotive .Food Processing .Medical .Packaging .Sawmill
  Connectivity / Function Fittings / Air-Logic  
 
Mead
 
Mead
 
Mead
 
Mead
 
Mead
 
Mead
 
Mead
 
Mead
 
 
 
 
 
 
 
 
The Preset Flow Control maintains a constant flow in one direction and full flow in the opposite direction. The operation of the Flow Control is based on the movement of a small disc; the disc shifts within the housing as the pressure differential changes from forward to reverse.
Download F-2804-404 Series Preset Flow Control PDF Catalog
The disposable Filters are designed to remove most contaminant particles in compressed air systems; thereby extending the life of more valuable components.
Download F-950, F-960, and F-970 Series Filters PDF Catalog
The inline Filtered Orifice Restrictors are designed for use in pneumatic control circuits.
The orifice restrictor and filter media are encased in a molded polysulfone housing with barbs for 1/16" and 1/8" I.D. tubing.
Download F-950 Series Filtered Orifice Restrictors PDF Catalog
The Orifice Restrictors are designed for use in pneumatic control circuits. They are available in eleven color-coded sizes from 0.004" to 0.040".
The orifices are precision molded of polysulfone and are held to flow tolerances of +/- 4%.
Download F-2815 and F-3120 Series Orifice Restrictors PDF Catalog
The Needle Valves are adjustable from 0 to the equivalent flow of a 0.025" diameter orifice; the flow is restricted in both directions. The 6 degree angle of the pin allows for precise control of flow.
Download F-2822 Series Plastic Needle Valves PDF Catalog
The Needle Valves are adjustable from 0 to the equivalent flow of a 0.025" diameter orifice; the flow is restricted in both directions. The 6 degree angle of the pin allows for precise control of fl
Download F-2822 Series Metal Needle Valves PDF Catalog
The Check Valves permit flow in one direction only; the operation of the check valve is based on the movement of a small disc within the housing.
The disc shifts within the housing as the pressure differential changes from forward to reverse.
Download F-2804 Series Check Valves PDF Catalog
The Test Point Indicator is a small, simple on-off indictor; it has a spring loaded plunger which returns to normal regardless of the mounting position.
Pressure as low as 4" water gauge will shift the plunger out.
Download F-2913-80 Series Test Point Indicator PDF Catalog
The F-4014-Series Diaphragm Amplifier is a miniature interface device that performs the same function as a piloted three-way valve, but at low outlet flow rates. Pneumatic signals of several inches of water gauge applied to the input will control the output pressure up to 35 PSI in both digital and analog systems.
Download F-4014 Series Diaphragm Amplifier PDF Catalog
The Diaphragm Comparator is a versatile control circuit component for both fluidic and pneumatic signal levels.
It performs many functions including those of an analog pressure comparator, an analog pressure repeater and a digital signal isolator.
Download F-4103 Series Diaphragm Comparator PDF Catalog
The Spring Sensor is a limit sensor designed for simple and reliable operation.
Functioning like a whisker valve, it is composed of a nylon deflection rod and a tightly wound coil spring. When the nylon rod is deflected 6 degrees or more, the coils of the spring separate and allow free air flow.
Download F-4419-120 Spring Sensor PDF Catalog
motion control suppliers
ACE AIR LOGIC AGI ANVER BALLUFF BIMBA CAMOZZI IAI INA WITTENSTEIN EXAIR SANYO DENKI FIRESTONE TUTHILL HERION TRIO MOTION NASON PANASONIC NORGREN SHEFFER SUNX TOLOMATIC TRD TURN-ACT
Delivering Intelligent Products and System Designs Since 1944
Cowper Inc. All rights reserved